Technical Tip
Ensure that you have configured Micronet, your hardware and the PDA users before trying to use Micronet Paperless Sync - refer to "Configuration".
The Paperless Sync module transfers data between Micronet and individual PDAs. Synchronising downloads data from Micronet to the PDA, allowing the PDA to receive updated information (e.g. picking slips, transfers, etc.). It also uploads completed work back to Micronet.
Take some time to read the following section before you start synchronising your PDA - "Mobile Sync - Overview".
Once the Data.Connect routines are setup and run on a timely basis, synchronising only involves a PDA procedure - refer to "Mobile Sync - PDA Procedures".
|
|
|
Technical Tip Ensure that you have configured Micronet, your hardware and the PDA users before trying to use Micronet Paperless Sync - refer to "Configuration". |